Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How can I do a point analysis on a line between two points?
Posted Oct 11, 2011, 12:52 p.m. EDT Fluid & Heat, Chemical Reaction Engineering Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am new to comsol and programing. I am modeling a parallel plate flow chamber in 2D. Basically, I have a rectangle with an inlet, an outlet and a reactive surface. I am modeling receptor-ligand binding with flow. I want to know the concentration of my species on points along the reactive surface. How can I do this?
Thanks you,
Nisha
I am new to comsol and programing. I am modeling a parallel plate flow chamber in 2D. Basically, I have a rectangle with an inlet, an outlet and a reactive surface. I am modeling receptor-ligand binding with flow. I want to know the concentration of my species on points along the reactive surface. How can I do this?
Thanks you,
Nisha
1 Reply Last Post Oct 11, 2011, 4:19 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
have you tried to make a line plot, select the line of interest, variable concentration, then define the x axis as "X (or Y or Z) and not the default "s" line length index
You can add several line plots to a 1D plot node
PS it works better in thenewver releases of Comsol ;)
--
Good luck
Ivar
have you tried to make a line plot, select the line of interest, variable concentration, then define the x axis as "X (or Y or Z) and not the default "s" line length index
You can add several line plots to a 1D plot node
PS it works better in thenewver releases of Comsol ;)
--
Good luck
Ivar