Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How can honey fluid be modified by COMSOL?

Posted Apr 4, 2019, 2:48 a.m. EDT Chemical Reaction Engineering Version 5.4 2 Replies

Kun Zheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I drunk over it, and this question inspired me, because it was very ropy and high crystallinity. If somebody has an idea, let us have a contect.

2 Replies Last Post Apr 4, 2019, 10:35 a.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Apr 4, 2019, 8:20 a.m. EDT
Updated: 6 years ago Apr 4, 2019, 8:35 a.m. EDT

Yes, you can model the flow of liquid honey with COMSOL Multiphysics. It is usually considered a newtonian fluid, albeit one with a high viscosity. Even if you wanted to model it as a non-newtonian fluid you could do that, provided your license includes the CFD Module or the Microfluidics Module or you're willing to modify the NS equations yourself.

Best regards,

Jeff

-------------------
Jeff Hiller
Yes, you can model the flow of liquid honey with COMSOL Multiphysics. It is usually considered a newtonian fluid, albeit one with a high viscosity. Even if you wanted to model it as a non-newtonian fluid you could do that, provided your license includes the CFD Module or the Microfluidics Module or you're willing to modify the NS equations yourself. Best regards, Jeff
Kun Zheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Apr 4, 2019, 10:35 a.m. EDT

Yes, you can model the flow of liquid honey with COMSOL Multiphysics. It is usually considered a newtonian fluid, albeit one with a high viscosity. Even if you wanted to model it as a non-newtonian fluid you could do that, provided your license includes the CFD Module or the Microfluidics Module or you're willing to modify the NS equations yourself.

Best regards,

Jeff

Thanks, I was excited.

>Yes, you can model the flow of liquid honey with COMSOL Multiphysics. It is usually considered a newtonian fluid, albeit one with a high viscosity. Even if you wanted to model it as a non-newtonian fluid you could do that, provided your license includes the CFD Module or the Microfluidics Module or you're willing to modify the NS equations yourself. > >Best regards, > >Jeff Thanks, I was excited.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content