Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
electromagnetic force on thin slab
Posted Oct 24, 2011, 8:18 a.m. EDT Low-Frequency Electromagnetics Version 4.2, Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I'm studing the electromagnetic force produced by three different coils on a very thin slab at the same time. The coils work one in DC(continue current) and the other two in AC(alternate currents). I'm woundering if is possible show the electromagnetic force on the surface of the slab. I have already computed the total force on the slab using force calculation but now i would like to see the force distribution on the slab and not the tatal value. Is possible see the EM foreach element of the slab's mesh, or is possible to define domains in the slab using postprocessing? Can someone help me?
Cheers
Nicola
I'm studing the electromagnetic force produced by three different coils on a very thin slab at the same time. The coils work one in DC(continue current) and the other two in AC(alternate currents). I'm woundering if is possible show the electromagnetic force on the surface of the slab. I have already computed the total force on the slab using force calculation but now i would like to see the force distribution on the slab and not the tatal value. Is possible see the EM foreach element of the slab's mesh, or is possible to define domains in the slab using postprocessing? Can someone help me?
Cheers
Nicola
1 Reply Last Post Oct 29, 2011, 12:50 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
The variables mf.Fltzx, mf.Fltzy, mf.Fltzz are the Lorentz force densities in a rectangular coordinate system when using the Magnetic Fields physics module.