Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

solid (block) compression vs heat transfer and changes

Posted Oct 28, 2011, 4:14 a.m. EDT Version 4.0, Version 4.0a, Version 4.1, Version 4.2, Version 4.2a 1 Reply

LiWah Wong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hey peeps,

indeed, wanna check if COMSOL Multiphysics is feasible to be used as a software platform to study solid (block) compression i.e. rock, and heat transfer within the solid?

thanks for insights!! many many thanks!

regards
Liwah
1 Reply Last Post Oct 28, 2011, 6:30 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 28, 2011, 6:30 a.m. EDT
Hi

from my understanding that is what COMSOL is for ;)

--
Good luck
Ivar
Hi from my understanding that is what COMSOL is for ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content