Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat transfer in phase change material

Posted Nov 4, 2011, 5:52 a.m. EDT Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.2 1 Reply

Carlos Perez de la Blanca Castellano
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody!

Im trying to simulate the heat transfer produced by an engine oil flow entering ina pipe at 300º through the fins and to the solar salt,but there is something wrong and i dont get any result.Im using the CONJUGATE HEAT TRANSFER MODULE

I attach the file!!!Any suggestion???i WILL BE REALLY GRATEFUL!!

THANKS

Carlos
1 Reply Last Post Dec 12, 2012, 7:32 a.m. EST
COMSOL Moderator

Hello Carlos Perez de la Blanca Castellano

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Maziyar Mahmoodi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 12, 2012, 7:32 a.m. EST
Hello ,
Dear Friend
You should reduce your inlet velocity to be convenient for your geometry . I have an other question about your model , can you help me ?
Hello , Dear Friend You should reduce your inlet velocity to be convenient for your geometry . I have an other question about your model , can you help me ?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content