Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Different Result ! Boundary surface and cut-plane
Posted Aug 17, 2019, 6:16 a.m. EDT General, MEMS & Piezoelectric Devices, Computational Fluid Dynamics (CFD) Version 5.4 1 Reply
Please login with a confirmed email address before reporting spam
I have a simple T-junction micro-mixer
Geometery: 200*200 micrometer - lenght 2.7 mm
Concentration Contour at outlet boundary using "surface" :
Concentration Contour at outlet boundary using "cut-plan" :
The problem is that when I use boundary surface for exctracting results I attain some results which are compeletly different from when I use cut-plan at same location. As you see in pictures, concentration countors are not identical in quantities and distribution! What is the problem? and why? would you please recommand a solution?
Sincerely,
Please login with a confirmed email address before reporting spam
Hi Khashayar,
I set up a small 3D modell and I observe exactly the same results. No matter if I use a surface- or cut-plane data-set. You can see it using my example model.
I suggest you to set up a small and simple model to test it out.
Best regards Michael
-------------------Michael Rembe
Rembe Consulting PartG mbB
www.rembe-consulting.de
Attachments: