Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Area measurement with a probe
Posted Nov 21, 2011, 10:10 a.m. EST 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to calculate a transfer function Zm = F_z(z=L) / W_z(z=0) on a 3D model.
I have a 3D complex geometry, which is varying with a scale factor (x=scale.x_original, y=scale.y_original,z=z_original)
so my cross-section Area_xy is varying with the scale factor
at z=0, there is a prescribed displacement, while in z = L, there is a fixed constraint
W_z = 1 m
F_z = sigma_z . Area(scale)
How can I calculate the Area(scale) ? I am using a parametric sweep study. I cannot find a dedicated probe expression
Regards,
Sylvain
Hello Sylvain Boyer
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.