Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Volume contraction in continuous casting mold

Please login with a confirmed email address before reporting spam

Is it possible to model the volume contraction of solidifying steel in a continuous casting mold without the thermal stress/thermal expansion part of the structural mechanics module?

The packages i got are the heat transfer module, mixer module, cfd module and the material library. Also the Solid mechanics part of the structural mechanics module. I do not, however, have the thermal stress function beneath the linear elastic material function.

Help would be much appreciated.


1 Reply Last Post Dec 3, 2019, 9:37 a.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Dec 3, 2019, 9:37 a.m. EST
Updated: 5 years ago Dec 3, 2019, 4:37 a.m. EST

Hello Andreas,

This thread discusses how you can modify the weak form of the equations to add thermal expansion if the license you are using does not include any of the modules in which that functionality is pre-implemented.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Andreas, [This thread](https://www.comsol.com/forum/thread/39909/adding-thermal-expansion?last=2017-06-23T14:45:22Z) discusses how you can modify the weak form of the equations to add thermal expansion if the license you are using does not include any of the modules in which that functionality is pre-implemented. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.