Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Chladni Plate Simulation App - How to change it to visualize a continuous range of frequencies
Posted Dec 7, 2019, 10:42 a.m. EST Interfacing, Acoustics & Vibrations, Simulation Apps Version 5.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi!
I have just found this simulator for Chladni Plates: https://br.comsol.com/model/chladni-plate-67591
I have no big simulation expertise, and my experience with COMSOL is relatively new. I'm trying to run this simulation for a full, continuous, range of frequencies, not only the eigenfrequencies. Is it possible? Where can I make changes to make it possible?
My ideia was to create a simulation like this one here: https://www.youtube.com/watch?v=ZWm6DTBhbcI
Thanks a lot!
Please login with a confirmed email address before reporting spam
Hi,
You need to run a frequency sweep, using a Frequency Domain study. Then, plot using an animation.
It is probably easier to start from a fresh model than from the app, since the latter contains a lot of specialization.
Regards,
Henrik
Henrik Sönnerlind
COMSOL