Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Boundary conditions for porous media in dam break case !
Posted Feb 3, 2020, 10:18 a.m. EST Fluid & Heat, Computational Fluid Dynamics (CFD) 0 Replies
Please login with a confirmed email address before reporting spam
I have a dam break simulation created on comsol as seen in the following video https://youtu.be/02tGVX0PRGo
This dam break is simulated using (Two phase flow - laminar - phase field) Now I want to place a porous media in a place as shown in the attached pic
I think that using the model (Two phase darcy law) is the suitable model but not sure.
I am asking what is the boundary condition that i need to specify for this case(porous media) and how to couple the (dam break) with the (porous media)
Thank you in advance
Attachments:
Hello Mohamed Tonsy
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.