Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error Circular variable dependency detected.
Posted Jan 18, 2012, 6:06 a.m. EST Plasma Physics, Studies & Solvers Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I got this error
Circular variable dependency detected.
- Variable: mod1.icp.sigmazz
- Geometry: 1
- Domain: 2 3 5
Whot it is mean ?
Variable sigma have defined in material browser.
Thank very much.
By.
I got this error
Circular variable dependency detected.
- Variable: mod1.icp.sigmazz
- Geometry: 1
- Domain: 2 3 5
Whot it is mean ?
Variable sigma have defined in material browser.
Thank very much.
By.
1 Reply Last Post Jan 18, 2012, 7:33 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
a circular dependency means that you have defined an input variable on some results or output variables.
This happens when you set up very non-linear models, but also often when you happen to use a variable name that COMSOL already has defined internally.
You need to go down the chain from your "sigma" definition and check how its defined and if some of the variables might have a name conflict with COMSOL internal variables names
--
Good luck
Ivar
a circular dependency means that you have defined an input variable on some results or output variables.
This happens when you set up very non-linear models, but also often when you happen to use a variable name that COMSOL already has defined internally.
You need to go down the chain from your "sigma" definition and check how its defined and if some of the variables might have a name conflict with COMSOL internal variables names
--
Good luck
Ivar