Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
beginner_heat transfer
Posted Feb 4, 2012, 12:00 p.m. EST Heat Transfer & Phase Change Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I have the honor to join you all the members of COMSOL forum, I am a beginner.
please I am very intersted to discover and use COMSOL. If someone can tell me about some simple problem (examples) with correction and guide or help to do them.
subject: heat transfer
Thank you.
I have the honor to join you all the members of COMSOL forum, I am a beginner.
please I am very intersted to discover and use COMSOL. If someone can tell me about some simple problem (examples) with correction and guide or help to do them.
subject: heat transfer
Thank you.
1 Reply Last Post Feb 4, 2012, 3:30 p.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
start by reading the doc USers manual, + HT perform the exercices described in the doc, check the tutorials on the main web site, and study in detail the examples (start simple) from the model library under COSMOL multiphysics HT than under HT (specific module) read the pdf files, perform the step by step exercices, and then compare to the model, you will se within a few weks you will be an expert ;)
Main approach start simple, use the default settigs to start with, increase gradually the difficulty wit time, if you jump straight into a NITF fluid/HT echange problem I bet you will quickly get lost and rather frustrated, but after a wek or two you will have no problems with even the complex mixed physics interfaces
--
Good luck and Have fun Comsoling, nothing better to "learn" physics
Ivar
start by reading the doc USers manual, + HT perform the exercices described in the doc, check the tutorials on the main web site, and study in detail the examples (start simple) from the model library under COSMOL multiphysics HT than under HT (specific module) read the pdf files, perform the step by step exercices, and then compare to the model, you will se within a few weks you will be an expert ;)
Main approach start simple, use the default settigs to start with, increase gradually the difficulty wit time, if you jump straight into a NITF fluid/HT echange problem I bet you will quickly get lost and rather frustrated, but after a wek or two you will have no problems with even the complex mixed physics interfaces
--
Good luck and Have fun Comsoling, nothing better to "learn" physics
Ivar