Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Convergence Problem in eddy currents simulation.
Posted Mar 2, 2012, 9:52 a.m. EST Low-Frequency Electromagnetics Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
I´m modelling a eddy current problem in comsol 3.5, but it´s not converging properly.
The model is quite simple, just a tube with a notch and a coil inside the tube.
I couldn´t attach the file using the attach tool of the forum (file too big), so I uploaded it in my public dropbox folder, link below:
- dl.dropbox.com/u/39332364/convergence_problem.mph
If anyone can help me understand why it is not converging, I´d be very gratefull.
Thank´s in advance!
Joao Rocha
UFRJ - Brazil
Hello Joao Vicente Goncalves Rocha
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I'm still having problems with this model. If anyone can take a look and try to help I would aprecciate.
Thanks in advance!
Joao Rocha
UFRJ - Brazil