Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Specification for a work station to run 3D simulation

Posted Oct 9, 2020, 10:17 a.m. EDT 3 Replies

Md Danish Eqbal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear COMSOL users, I would like to get a work station for running my COMSOL Simulation (Both 3D and 2D). I need some assistance in the specification of the machine. Can you Please tell me which type of work station could be most suitable for my work? Please specify everything clearly so that I can go for that easily. Thanks, and Regards Danish

3 Replies Last Post Oct 15, 2020, 9:08 a.m. EDT
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Oct 10, 2020, 8:33 p.m. EDT

You will want to look at

https://www.comsol.com/system-requirements

How much you go beyond the minimum requirements depends on how big your problems are. Some 3D simulations run OK on a basic laptop.

You will want to look at https://www.comsol.com/system-requirements How much you go beyond the minimum requirements depends on how big your problems are. Some 3D simulations run OK on a basic laptop.
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Oct 12, 2020, 8:37 a.m. EDT

Hello Danish,

In addition to the system requirements page, which only tells you about the minimum specifications, this page should help you spec out a new machine: Support Knowledge Base entry 866.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Danish, In addition to the system requirements page, which only tells you about the minimum specifications, this page should help you spec out a new machine: [Support Knowledge Base entry 866](https://www.comsol.com/support/knowledgebase/866). Best regards, Jeff
Md Danish Eqbal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Oct 15, 2020, 9:08 a.m. EDT

Thanks Dave and Jeff for the information.

Thanks Dave and Jeff for the information.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content