Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Droplet breakup in a T-junction

Posted Mar 27, 2012, 3:01 a.m. EDT MEMS & Nanotechnology, Fluid & Heat, MEMS & Piezoelectric Devices Version 4.2a 1 Reply

Matteo Molino
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

i'm trying to simulate the droplet breakup in a T-junction, but between a solution of water and air (water is the dispersed phase). Have someone already tryed to do this simulation? which parameters should change to obtain the droplet breakup?

Any help appreciated.
1 Reply Last Post Mar 27, 2012, 9:35 a.m. EDT
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 27, 2012, 9:35 a.m. EDT
Which multi-phase flow model are you using? For droplet breakup I recommend the two-phase flow with phase-field.

Nagi Elabbasi
Veryst Engineering
Which multi-phase flow model are you using? For droplet breakup I recommend the two-phase flow with phase-field. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content