Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Acousto-optic simulation
Posted Jan 23, 2021, 9:48 a.m. EST Wave Optics, Structural & Acoustics, Acoustics & Vibrations Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
While simulating in time domain the optics as well acoustic simulation in ns(nanoseconds) , I could get my desired effects, but the optics mode is like standing wave. If I'm moving to fs (femtoseconds) regime then the optics mode is propagating but the acoustic one is not desirable (say it is incorrect). I need both at a same time frame, I mean that at the same scale; since I'm taking the acoustic effect on optics, it cannot be at different scale or steps (within the scale). Can anyone suggest how to solve this problem?
Hello Shuvajit Roy
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.