Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to solve inverse problem in electrical resistance tomography using optimization module?
Posted Feb 14, 2021, 8:32 a.m. EST Electromagnetics, Low-Frequency Electromagnetics, Optimization Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
The Electrical Resistance Tomography has been divided into two problems. The forward problem and the inverse problem. The forward problem consists of creating a virtual model of a phantom with a tumour like impurity and consisting of electrodes surrounding the phantom and we pass alternating current to the one electrode in each cycle and the voltage across all other electrodes is been calculated. This is done for all electrodes.
The inverse problem involves using these voltages and reconstructing the images of phantom so that the exact location of the impurity has to be located. How to solve the inverse problem using optimiation module in this technique using the obtained voltages from the forward problem?
Hello Ninad Naik
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.