Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Dirichlet and Neumann Boundary Condition on a boundary

Posted Feb 24, 2021, 12:40 p.m. EST Electromagnetics, General 2 Replies

Umesh Shahdadpuri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have to solve laplace equation in 2D domain (rectangle 0< x < a , 0 <y <b)

I need to enter the boundary condition on one side of rectangle i.e. going from (0,0) to (a,0)

On this line I want to enter mix boundary condition i.e. if (x<d1) V = V_o

else if (d1< x <d2) n.(del V) = 0

else V = V_o

Can someone help how I can enter this mixed boundary condition on one boundary?

2 Replies Last Post Mar 21, 2021, 3:51 a.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Feb 24, 2021, 1:18 p.m. EST

Hello Umesh,

Assuming that d1 and d2 are known quantities, I would split that bottom boundary into three by adding points at d1 and d2. See attached file.

Best,

Jeff

-------------------
Jeff Hiller
Hello Umesh, Assuming that d1 and d2 are known quantities, I would split that bottom boundary into three by adding points at d1 and d2. See attached file. Best, Jeff

Attachments:

Umesh Shahdadpuri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Mar 21, 2021, 3:51 a.m. EDT
Updated: 4 years ago Mar 21, 2021, 4:24 a.m. EDT

Hello Jeff,

Thank you very much.

Regards! Umesh

Hello Jeff, Thank you very much. Regards! Umesh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content