Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Can anyone hlep me find what's going wrong

Posted May 2, 2012, 3:08 a.m. EDT Fluid & Heat, Microfluidics, Studies & Solvers Version 4.2 0 Replies

Michal Challi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, all
I have attached the mph file below.Now the question is that if the Pref is 1[atm],the result can be got.However my experiment condition is low vacuum(about 1e-2Pa),that means the Pref can set 1e-2 Pa?I have tried ,but failed and Comsol shows "Can not find consist initial value and the last time step is not converged",Can anybody know what's going wrong?
Thank you for your replies

Attachments:

0 Replies Last Post May 2, 2012, 3:08 a.m. EDT
COMSOL Moderator

Hello Michal Challi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content