Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

moving mesh

Posted May 9, 2012, 10:59 a.m. EDT Mesh, Structural Mechanics Version 4.2a 1 Reply

Massimo Bechis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I have to model the deformation in an soft object pressed by a rigid punch.
Which option would capture the contraction in moving mesh physics: deformed geometry or moving mesh?
Morevover, is moving mesh physics necessary in this model?

Thanks
Massimo
1 Reply Last Post May 9, 2012, 1:15 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 9, 2012, 1:15 p.m. EDT
Hi

I would say if you have "large" deformations from your "soft" body then moving mesh would be best

--
Good luck
Ivar
Hi I would say if you have "large" deformations from your "soft" body then moving mesh would be best -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content