Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

mass transfer coupled with two phase flow (level set)

Posted May 18, 2012, 11:30 a.m. EDT 0 Replies

Mranal Jain
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Everyone,

I am trying to study mass transfer with two phase flow. My question is; how to implement mass transfer boundary conditions (no flux or finite flux) at the interface, where interface is defined as a level set function (phi =0.5). I have tried varying Diffusivity (D) as a function of level set parameter 'phi' such that it takes very small values in other phase but no success.

Please share your experience, if you are/were engaged in similar study. Adding mass transfer to two-phase flow problems is not supported in the current interfaces based on the level-set and phase field methods (as told by support).

Thanks in advance.
0 Replies Last Post May 18, 2012, 11:30 a.m. EDT
COMSOL Moderator

Hello Mranal Jain

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content