Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How can I build the structure with sinusoidal-shape interface in comsol?

Posted May 21, 2012, 1:10 a.m. EDT RF & Microwave Engineering, Geometry Version 3.5a 2 Replies

Jigang Hu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi! I am a novice and have a question that how to construct a geometry object with the sinusoidal shape interface,e.g.sinusoidal grating in comsol 3.5a? Thank you very much.Here is my email:hujigang@hfut.edu.cn.
2 Replies Last Post May 21, 2012, 9:28 a.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 21, 2012, 8:55 a.m. EDT
Parametric curves were not available in version 3.5a, but it is available in more recent versions.
Parametric curves were not available in version 3.5a, but it is available in more recent versions.
Jigang Hu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 21, 2012, 9:28 a.m. EDT
Many thanks! It seems to update the version.
Many thanks! It seems to update the version.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content