Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

deformation induced current change on a wire

Posted May 25, 2012, 8:04 a.m. EDT MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics 1 Reply

ukbayrak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

Anyone can help me about how to model the deformation induced current change on a wire?

Thanks,
1 Reply Last Post May 25, 2012, 2:22 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 25, 2012, 2:22 p.m. EDT
Hi

you need to define which phenomena (which materials parameter) will change depending on stress or strain, express that in the material definition and model as ususal

--
Good luck
Ivar
Hi you need to define which phenomena (which materials parameter) will change depending on stress or strain, express that in the material definition and model as ususal -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content