Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
use input data for simulation from a previuso model result
Posted Jun 3, 2021, 9:28 a.m. EDT Structural Mechanics Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
Hi everyone, I want to study the stress field due to the application of load on a cavity. I did this modelling in a stationary mode and it is fine. Now, I would like to see the stress field over time, but I want to apply the load condition only at t=0 and see the effect on the strees over time, so for t=0+ until t=365 days, without having the boundary condition applied to the boundaries/edge for the duration of my modelling.
I was thinking to use the result of the stationary model as an input for the time-dependent study. My question is if is possible in comsol by having two studies: study 1 = stationary and study 2 = time dependend and in the latter specify the input data from the first one.
I tried to explore the Study options given but I am not sure I am heading in the right direction. Has somebody some suggest? Or some documentation for me to consult?
Thanks for the help, Chiara
Hello Chiara Lanzi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.