Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

RE: Changing space dimension from 2D axisymmetric to 2D

Posted May 31, 2012, 10:39 a.m. EDT Parameters, Variables, & Functions Version 4.2a 2 Replies

Smita
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I accidentally chose 2D axisymmetric when making my model and I want to change it to 2D without having to make the geometry again.

I am using 4.2a version of COMSOL.

Help please?

--
Thanks, Smita
2 Replies Last Post May 31, 2012, 2:06 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 31, 2012, 1:29 p.m. EDT
Hi

save the geometry (export) into a mphbin file and import it again in the new model file

--
Good luck
Ivar
Hi save the geometry (export) into a mphbin file and import it again in the new model file -- Good luck Ivar
Smita
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 31, 2012, 2:06 p.m. EDT
That's awesome.

--
Thanks, Smita
That's awesome. -- Thanks, Smita

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content