Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Reduced integration, hourglassing, and shear lock

Please login with a confirmed email address before reporting spam

I want to know the different types of elements that comsol has, what elements do comsol use to eliminate the hourglass and shear lock?

Does comsol use reduced integration?

Thanks in advance

2 Replies Last Post Aug 20, 2016, 1:39 p.m. EDT
Nagi Elabbasi Facebook Reality Labs

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 4, 2012, 11:40 a.m. EDT
COMSOL does not use reduced integration and therefore does not need hourglass control. To avoid shear locking in solid mechanics use the default quadratic elements.

Nagi Elabbasi
Veryst Engineering
COMSOL does not use reduced integration and therefore does not need hourglass control. To avoid shear locking in solid mechanics use the default quadratic elements. Nagi Elabbasi Veryst Engineering

Masoud Dehghani Champiri

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Aug 20, 2016, 1:39 p.m. EDT
Hi,

I need to use the reduced integration (one-point integration) in COMSOL and specify the hourglass control for that. Is there any way to make it in COMSOL 5.2a?

Best regards,
Masoud
Hi, I need to use the reduced integration (one-point integration) in COMSOL and specify the hourglass control for that. Is there any way to make it in COMSOL 5.2a? Best regards, Masoud

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.