Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Nyquist diagram of the impedance

Posted Jun 19, 2012, 12:47 a.m. EDT 2 Replies

Grigory Timoshenko
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hellow!
Is it possible to draw a Nyquist diagram of the impedance for some 3D model? Model consists of several dozen cubics, each cubic has its properties (electric permittivity, magnetic permeability, electrical resistivity and so on).
How i can do it, and in which version?
P.S. Sorry for my bad English.
2 Replies Last Post Jun 19, 2012, 5:02 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 19, 2012, 3:14 a.m. EDT
Hi

cant you use the DErived Variables in the Results section and write out your equations into tables and plot them ?

--
Good luck
Ivar
Hi cant you use the DErived Variables in the Results section and write out your equations into tables and plot them ? -- Good luck Ivar
Grigory Timoshenko
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 19, 2012, 5:02 a.m. EDT
Yes, this solution is suitable. How create a model for obtain data for the table?
I am beginner in Comsol.
Advance thanks.
Yes, this solution is suitable. How create a model for obtain data for the table? I am beginner in Comsol. Advance thanks.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content