Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

while building "mirror1"

Posted Sep 14, 2021, 1:13 a.m. EDT Computational Fluid Dynamics (CFD) Version 5.6 1 Reply

Upendra Agrawal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am getting this error while building "mirror1" in 'plane geometery'; you need to provide input objects.

1 Reply Last Post Sep 14, 2021, 6:52 a.m. EDT
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Sep 14, 2021, 6:52 a.m. EDT
Updated: 3 years ago Sep 14, 2021, 6:52 a.m. EDT

Hi Upendra,

You need to select and add the geometry objects that you want to mirror so that they appear in the Input section under Input objects in the Settings window for the Mirror node.

Best regards,

Magnus

Hi Upendra, You need to select and add the geometry objects that you want to mirror so that they appear in the **Input** section under **Input objects** in the Settings window for the **Mirror** node. Best regards, Magnus

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content