Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

wrench example error in 5.6

Posted Sep 28, 2021, 11:43 p.m. EDT Structural & Acoustics, General, Structural Mechanics Version 5.6 1 Reply

Joseph Stavitsky
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I tried to follow the pdf to reproduce the wrench stress/strain example at

https://www.comsol.com/model/stresses-and-strains-in-a-wrench-8502

I got as far as Study>compute and got the error

"Undefined material property 'nu' required by Linear Elastic Material 1"

As far as I can tell all parameters match

My file is below

https://drive.google.com/file/d/1dTc0aHgMm4Abe0YfmJoXTBVlpPv1l5Le/view?usp=sharing

Many thanks in advance for any help

Joe

1 Reply Last Post Sep 29, 2021, 3:01 a.m. EDT
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Sep 29, 2021, 3:01 a.m. EDT

This means that you have no material data. It seems that you have made some mistake while working with the instructions under the Add Material section on page 4 of the pdf file.

-------------------
Henrik Sönnerlind
COMSOL
This means that you have no material data. It seems that you have made some mistake while working with the instructions under the Add Material section on page 4 of the pdf file.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content