Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to set a maximum temperature

Posted Nov 12, 2021, 9:19 a.m. EST Version 5.6 1 Reply

Hannes Langer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey, i have a model with a moving heat source in a certain pattern. I also considered the energy necceserary to change from solid to melted and from melted to evaporated material. Some parts of this workpiece exceed now during the process the evaporation temperature by far. But this is nonsense, because obviously it cannot, because the evaporated material is being removed from the workpiece. Now is the question: How can I set up a maximum temperature for my material?

Thanks in advance!

Greetings, Hannes

1 Reply Last Post Nov 12, 2021, 9:31 a.m. EST
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Nov 12, 2021, 9:31 a.m. EST

Maybe this post is what you need https://www.comsol.com/blogs/how-to-add-stop-conditions-to-solvers-in-comsol-multiphysics/

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Maybe this post is what you need https://www.comsol.com/blogs/how-to-add-stop-conditions-to-solvers-in-comsol-multiphysics/

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content