Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

contact with friction

Posted Jul 5, 2012, 9:50 a.m. EDT Version 4.2 0 Replies

Daniel Old
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey,

I´m trying to model a ceramik block that slide on a second ceramik block.

The distance between the first and the second block is 0.001 m.

In the middle of the lower edge of the first block I set a fixed constraint.
The two blocks are set up as a contact pair, and a static coulomb friction is set.
The first block has a body load of (-rho*gravity).

my problems are:

- the upper block does not reach the lower.
- result = no friction

Has someone an example?

Thanks for tips


Daniel
0 Replies Last Post Jul 5, 2012, 9:50 a.m. EDT
COMSOL Moderator

Hello Daniel Old

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content