Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

moving mesh

Posted Jul 19, 2012, 2:50 a.m. EDT Version 4.0 1 Reply

Eba Flora
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

sir,
I'm trying to simulate a piezoelectric cantilever. i like to increase the thickness using moving mesh but I'm get the increased thickness but i'm unable to get any displacement variation.somebody guide me with the tips to solve this
1 Reply Last Post Jul 19, 2012, 3:15 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 19, 2012, 3:15 a.m. EDT
Hi

that was a little shaky in the v4.0 version, much better since, pls read carefully the differences between ALE, DG and parametric sweep of Parameter driven Geometry


--
Good luck
Ivar
Hi that was a little shaky in the v4.0 version, much better since, pls read carefully the differences between ALE, DG and parametric sweep of Parameter driven Geometry -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content