Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Bending stresses due to vibration

Posted Aug 16, 2012, 6:01 a.m. EDT Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers, Structural Mechanics 0 Replies

Vivek KK
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi, this is rotor dynamics. A shaft supported by two ball bearings is under vibration due to misalignment of the shaft with the coupling. now i need to calculate the bending stresses in the shaft due to vibration. I was provided with the bending vibration data of the rotor system. [Vibration is being measured at the bearings, rpm of shaft and all dimension is known] . So, how to find the stresses of the shaft.?
0 Replies Last Post Aug 16, 2012, 6:01 a.m. EDT
COMSOL Moderator

Hello Vivek KK

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content