Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulation of sunlight transmittance of ITO substrate with different roughness
Posted Jul 2, 2022, 10:26 p.m. EDT Electromagnetics, Modeling Tools & Definitions, Modeling Workflow Version 6.0 0 Replies
Please login with a confirmed email address before reporting spam
Dear researchers
Recently, I am trying to simulate "the transmittance relationship of ITO substrates with different roughness to sunlight". However, my fitting results show that the transmittance of different roughness has no obvious change.
Question 1: How to set the different roughness of the substrate? Can I use periodic sin function to represent the rough surface ?
Question 2: Is there any problem with my modeling? Here is my model. Wave optics, frequency domain, using two-dimensional graphics, sin function ordinarization to simulate ITO fluctuations (I don't know what better method to express different roughness), the upper and lower layers are the the air layers, the outer edge of the air layer is a perfect matching layer(PML), the upper and lower outermost boundary is the scattering boundary condition; The left and right boundaries are periodic conditions.
I would be grateful for your valuable answers!
Hello Zihao Chu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.