Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modeling Acoustic Metamaterial

Posted Aug 23, 2012, 2:57 p.m. EDT Acoustics & Vibrations Version 4.2a 2 Replies

Riaz Ahmed
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I want to model an 2D acoustic metamaterial in Comsol. My target is to apply acoustic waves along one side of the geometry and calculate the wave amplitude from opposite face of the geometry. I also want to plot effective mass density and bulk modulus with respect to frequency.

Can anyone help me with step by step procedure?

Regards
Riaz
2 Replies Last Post May 13, 2015, 1:03 a.m. EDT
COMSOL Moderator

Hello Riaz Ahmed

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Stefano Laureti
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Apr 7, 2015, 6:12 a.m. EDT
Hi,
I have the same problem. Did you manage it somehow? Can you please tell me how to do it?
Any help will be really appreciated!

Regards
Stefano
Hi, I have the same problem. Did you manage it somehow? Can you please tell me how to do it? Any help will be really appreciated! Regards Stefano
冠 王
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago May 13, 2015, 1:03 a.m. EDT
i have to do this model
but have a little problem about the model.

How to calculate the amplitude and phase of the reflected wave
i have to do this model but have a little problem about the model. How to calculate the amplitude and phase of the reflected wave

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content