Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

parameters names must not be empty

Posted Sep 13, 2012, 6:20 p.m. EDT RF & Microwave Engineering, Geometry Version 4.3 3 Replies

Naema Othman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey,

again, this is an error I ha with comsol 4.3: parameters names must not be empty

I need a quick help

attached is my comsol file, you just need to run it and see the error.
and also i attached a printed screen of my parameters table and the error window in case some one is not having comsol to run my file.

Naema
3 Replies Last Post Sep 11, 2014, 2:14 p.m. EDT
COMSOL Moderator

Hello Naema Othman

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Saurabh Mittal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 12, 2013, 3:44 p.m. EST
this error iss a big problem and does not tell which parameter is empty!
this error iss a big problem and does not tell which parameter is empty!
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 12, 2013, 4:33 p.m. EST
Naema,

You have a Parametric Sweep node in your study without parameters and their values/ranges specified.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Naema, You have a Parametric Sweep node in your study without parameters and their values/ranges specified. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Sahar Mirzaei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Sep 11, 2014, 2:14 p.m. EDT
Thanks !
Thanks !

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content