Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

pipe flow modeling

Posted Sep 24, 2012, 10:47 a.m. EDT 0 Replies

Arpita Mondal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi,

I have simulated a 2D pipe flow modeling. in initial condition, I have given velocity as zero. Then at inlet I gave inlet velocity at 1 m/s with one step function. After simulation, at time zero the model shows some velocity in the pipe fluid. I am wondering as I have given initial velocity zero, it should show zero velocity at time zero, but it is not the actual result.

Any help with with matter will be appreciated.

Thanks!
0 Replies Last Post Sep 24, 2012, 10:47 a.m. EDT
COMSOL Moderator

Hello Arpita Mondal

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content