Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

subdomain definition

Posted Oct 2, 2012, 9:36 a.m. EDT Geometry, Mesh 1 Reply

Hoda Ayati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I would like to define the element surfaces (mesh) as subdomains in Comsol/Matlab.

I was wondering if someone could help me.

Thanks,
Hoda

1 Reply Last Post Oct 2, 2012, 3:26 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 2, 2012, 3:26 p.m. EDT
Hi

I'm not sure if I catch your right, in the GUI if you want to mesh a boundry, before the domain (v4 notation) you need to edit manually the mesh nodes and add a "more -> triangular mesh on your specified boundary. Vi amatlab I'm not sure, as I have managed NOT to use matlab since v4 has arrived ;)

--
Good luck
Ivar
Hi I'm not sure if I catch your right, in the GUI if you want to mesh a boundry, before the domain (v4 notation) you need to edit manually the mesh nodes and add a "more -> triangular mesh on your specified boundary. Vi amatlab I'm not sure, as I have managed NOT to use matlab since v4 has arrived ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content