Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
solver command doesn't work in matlab
Posted Feb 12, 2010, 8:24 a.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I would like to change a physics parameter of the model through the matlab command window
and after retrieve the postprocessing data.
I tried:
fem.appl{1}.bnd.Fz{2}=['-15[mmHg]'];
fem.xmesh = meshextend(fem);
fem.sol = femstatic(fem);
[ex,ey,ez] = postinterp(fem,'u','v','w',p,'Edim',2,'Dom',19);
But this doesn't work, because the postprocessing data are always the same and never change?!
Did I forget an important step?
It would be great, if you could give me a hint.
Thanks, Sabine
I would like to change a physics parameter of the model through the matlab command window
and after retrieve the postprocessing data.
I tried:
fem.appl{1}.bnd.Fz{2}=['-15[mmHg]'];
fem.xmesh = meshextend(fem);
fem.sol = femstatic(fem);
[ex,ey,ez] = postinterp(fem,'u','v','w',p,'Edim',2,'Dom',19);
But this doesn't work, because the postprocessing data are always the same and never change?!
Did I forget an important step?
It would be great, if you could give me a hint.
Thanks, Sabine
1 Reply Last Post Feb 13, 2010, 8:59 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello Sabine,
I'm not sure but you might have forgotten this:
fem = multiphysics(fem);
It's the function that checks the coherency of your model parameters.
Hope it helps
Ronan
I'm not sure but you might have forgotten this:
fem = multiphysics(fem);
It's the function that checks the coherency of your model parameters.
Hope it helps
Ronan