Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to simulate Dielectrophoresis in Comsol?

Posted Oct 4, 2012, 8:07 p.m. EDT 2 Replies

Tasrif Rahman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,
I am new to this comsol. I want to simulate the effect of dielectrophoretic force on charged particles. I have arrays of microelectrodes and I want to apply AC electric field (like 40V 10khz). I am using comsol 3.4. So can you suggest me how to do it? or how to select the appropriate physics for this problem?

Regards
Tasrif
2 Replies Last Post Oct 5, 2012, 11:09 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 5, 2012, 1:31 a.m. EDT
Hi

I believe that with the v3 you have to write out all the equations as separate PDEs yourself, in v4.3 with the particle module you have most of it pre-cooked for you by COMSOL

--
Good luck
Ivar
Hi I believe that with the v3 you have to write out all the equations as separate PDEs yourself, in v4.3 with the particle module you have most of it pre-cooked for you by COMSOL -- Good luck Ivar
Tasrif Rahman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 5, 2012, 11:09 p.m. EDT
Hi Ivar,
Thank you very much for your reply. Can you suggest me any tutorial?

Tasrif
Hi Ivar, Thank you very much for your reply. Can you suggest me any tutorial? Tasrif

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content