Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Meshing Error

Posted Oct 15, 2012, 1:47 a.m. EDT Geometry, Mesh Version 4.3 1 Reply

Fahmida Naznin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to mesh a geometry with 2 concentric cylinders present in a air flow passage for thermal study. While meshing.. i am getting the following error "intersecting face elements" for the inner and outer cylinder faces.. I have included the faces of the outer cylinder in boundary layers selection.
Kindly suggest.
1 Reply Last Post Oct 17, 2012, 3:50 a.m. EDT
Kostas Nikolopoulos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 17, 2012, 3:50 a.m. EDT
I get the same error but ,the geometry I have is different.I am also trying to solve that problem.What is the distance between the inner and outer cylinder faces?
I get the same error but ,the geometry I have is different.I am also trying to solve that problem.What is the distance between the inner and outer cylinder faces?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content