Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

phase dependent cuurent

Posted Nov 9, 2012, 6:51 p.m. EST 5 Replies

Samuel Morgan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi all

how can i induce some phase dependent currents in comsol?
especially i wanna know how to make 3 currents with 120 degree different phase
5 Replies Last Post Nov 11, 2012, 9:09 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 10, 2012, 4:16 a.m. EST
Hi

COMSOL uses the "phasor approach so by using complex values for the amplitudes you can includ phase info to your frequency domain (harmonic) solver sweep analysis, check the doc, and I belive I have seen a model library of a 3 phse example, or was it on the model gallerie ?

It has alread ybeen discussed a few years ago, here on the Forum, the method is still the same ;)

--
Good luck
Ivar
Hi COMSOL uses the "phasor approach so by using complex values for the amplitudes you can includ phase info to your frequency domain (harmonic) solver sweep analysis, check the doc, and I belive I have seen a model library of a 3 phse example, or was it on the model gallerie ? It has alread ybeen discussed a few years ago, here on the Forum, the method is still the same ;) -- Good luck Ivar
Samuel Morgan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 10, 2012, 6:51 a.m. EST
thanks a lot for your answer ivar
may i ask from you to put the link you mentioned? i couldnt find it.
thanks a lot for your answer ivar may i ask from you to put the link you mentioned? i couldnt find it.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 10, 2012, 7:11 a.m. EST
Hi

try a search on the Forum with PHASOR, and do the same on the help of COMSOL, and/or the PDF doc of the general user manual and the ACDC one

--
Good luck
Ivar
Hi try a search on the Forum with PHASOR, and do the same on the help of COMSOL, and/or the PDF doc of the general user manual and the ACDC one -- Good luck Ivar
Samuel Morgan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 10, 2012, 11:50 a.m. EST
thanks for your quick answer.

I found this link and it appears it would be useful but I use COMSOL 4.1 and this model has been written by a higher version so I cant load it. is it possible to open that? what should I do?

thanks in advanced
thanks for your quick answer. I found this link and it appears it would be useful but I use COMSOL 4.1 and this model has been written by a higher version so I cant load it. is it possible to open that? what should I do? thanks in advanced
Samuel Morgan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 11, 2012, 9:09 a.m. EST
link: www.comsol.com/community/forums/general/download/file/9293/Stator_3phase.mph
link: http://www.comsol.com/community/forums/general/download/file/9293/Stator_3phase.mph

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content