Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to flip the x-axis?

Posted Nov 14, 2012, 2:39 p.m. EST Version 4.3a 1 Reply

Mah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Does anybody have any idea about how to flip the x-axis please?

Thank you so much for any help
1 Reply Last Post Nov 14, 2012, 2:46 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 14, 2012, 2:46 p.m. EST
Hi

use the Results - Derived Variables to generate your plot values, and select the appropriate horizontal / vertical values

--
Good luck
Ivar
Hi use the Results - Derived Variables to generate your plot values, and select the appropriate horizontal / vertical values -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content