Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Soft magnetic material not acting as soft magentic
Posted Feb 19, 2024, 10:13 a.m. EST Electromagnetics, Materials, Physics Interfaces Version 6.2 1 Reply
Please login with a confirmed email address before reporting spam
Dear All,
I am trying to do some magenetic field simulation with multi-turn solenoids that are current driven to provide the electro-magnetic excitation. However, when the simulation finished the iron in the design does not apear to be affecting the field at all. I have tried several options from the material liberary, I noticed that whenI have had this work in the past, on the material properties itself there are ticked boxes with electrical conductivity and some other perameters. That is not happen now with my current simulation. Am I setting up the model wrong? Any suggestions are welcome.
Please login with a confirmed email address before reporting spam
My guess is yes, that you are setting up the model wrong. Other folks here might be able to guess in more detail about the error, based on your description. But the probability of a helpful reply will be increased if you can post your .mph file to the forum.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara