Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Failed to generate mesh for subdomain
Posted Jan 15, 2013, 9:20 a.m. EST 0 Replies
Please login with a confirmed email address before reporting spam
I have a metal nanoparticle (radius = 100nm) next to an emitter embedded in glass ( n = 1.5). The computational domain around the metal nanoparticle and the emitter is also spherical and it is 650nm in diameter (PML layer).
I measure the emission from the emitter in terms of Power and it works really great. The parameter for the mesh was:
'max element size' = 3.5e-9 and 'growth rate' = 1.25
I start to have a problem with mesh for the glass subdomain once I increase the size of the nanoparticle and the computational domain.
The computer i am using has 64 GB RAM and 16 processors. The error i get everytime is the following...
Failed to generate mesh for subdomain...
Coordinate of a point in 3D
I have tried to change the 'max element size' and 'growth rate' values but it does not help at all.
I would be grateful to anyone who could help me figure this out.
Looking forward to getting replies. :)
Thanks in advance,
...
Hello ajeetraj
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.