Questions for Mode Analysis Boundary Conditions

Please login with a confirmed email address before reporting spam

Hello,

I'm currently using 2D Mode Analysis study to perform some optical mode analysis on a 2D waveguide, consisting of Lithium Niobate (core), SiO2 (substrate and cladding). I realize that if I set all boundaries to be "Scattering boundary conditions", the computed simulation field is very weekly confined in the waveguide region. However, if I change some boundaries to be "Perfectly Electrical Conductors", the field is confined within the waveguide very well. Intuitively the simulation I'm performing should be purely optical without any electrical contacts, which should not be affected by boundary conditions at all. Hence I wonder why the changes of boundary conditions will heavily impact the simulation field profile? Please feel free to let me know if there is anything I set incorrectly.



1 Reply Last Post Nov 14, 2024, 10:51 a.m. EST

Please login with a confirmed email address before reporting spam

Posted: 1 day ago Nov 14, 2024, 10:51 a.m. EST

I checked your model and you actually don't even need to use the SBC. if you use the PEC on the boundaries of your geometry, it will also give you the right result. It allows to avoid diffusion and loss of your wave when you "introduce". Especially here, you don't have port so comsol does not understand the things like you if you don't put the right boundaries. At the end it is to mimic the a PEC but don't take it like a metal, it may be a bit weird but in case check the help or chatG*** he can explain quite well I hope it helps you

I checked your model and you actually don't even need to use the SBC. if you use the PEC on the boundaries of your geometry, it will also give you the right result. It allows to avoid diffusion and loss of your wave when you "introduce". Especially here, you don't have port so comsol does not understand the things like you if you don't put the right boundaries. At the end it is to mimic the a PEC but don't take it like a metal, it may be a bit weird but in case check the help or chatG*** he can explain quite well I hope it helps you

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.