Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using a step function for a stationary study

Posted Feb 8, 2013, 8:13 p.m. EST Computational Fluid Dynamics (CFD) Version 4.2a 0 Replies

John McTernan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am attempting to model a cyclone using the k-epsilon solver and occasionally get some convergence issues. Would it make sense to use a step function to ramp up the inlet velocity? Can I use a step function with a stationary study?
0 Replies Last Post Feb 8, 2013, 8:13 p.m. EST
COMSOL Moderator

Hello John McTernan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content