Ring in 2D in a side projection for Langevin

Please login with a confirmed email address before reporting spam

Good day. Please tell me how to draw a ring in 2D in a side projection so that the program perceives it as a whole element? Because when drawing it from the side, the ring looks like a rectangle torn in the middle. This is necessary for constructing a Langevin piezoelectric emitter in 2D. Even if these two pieces are combined in geometry, then when choosing a material, it still breaks it into two pieces.



5 Replies Last Post Dec 20, 2024, 10:40 a.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 days ago Dec 20, 2024, 8:47 a.m. EST
Updated: 3 days ago Dec 20, 2024, 9:15 a.m. EST

Hello Sergey,

If this system is axisymmetric, then you should select 2D axisymmetric in the Model Builder. Then you will see that in the Graphics window when you are drawing the geometry the axis of revolution r=0 is shown; you should draw (half of what you currently have in your screenshots) on the r>=0 half.

For an example, see this tutorial or many others in the Application Gallery. Best,

Jeff

-------------------
Jeff Hiller
Hello Sergey, If this system is axisymmetric, then you should select 2D axisymmetric in the Model Builder. Then you will see that in the Graphics window when you are drawing the geometry the axis of revolution r=0 is shown; you should draw (half of what you currently have in your screenshots) on the r>=0 half. For an example, see [this tutorial](https://www.comsol.com/model/steady-state-2d-axisymmetric-heat-transfer-with-conduction-453) or [many others in the Application Gallery](https://www.comsol.com/models?q=axisymmetric). Best, Jeff

Please login with a confirmed email address before reporting spam

Posted: 3 days ago Dec 20, 2024, 8:54 a.m. EST

Thank you very much.

Thank you very much.

Please login with a confirmed email address before reporting spam

Posted: 3 days ago Dec 20, 2024, 10:16 a.m. EST

If the system as a whole is not axisymmetric (another Langevin appears, located nearby, and the elements above them are not axisymmetric), then what to do? It is also possible to draw this in 3D, but the calculation will be very, very long, if it is calculated at all.

If the system as a whole is not axisymmetric (another Langevin appears, located nearby, and the elements above them are not axisymmetric), then what to do? It is also possible to draw this in 3D, but the calculation will be very, very long, if it is calculated at all.

Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 days ago Dec 20, 2024, 10:31 a.m. EST

A 2D axisymmetric analysis can only be performed if the phenomenon is indeed axisymmetric. You may need to (try to) go 3D.

-------------------
Jeff Hiller
A 2D axisymmetric analysis can only be performed if the phenomenon is indeed axisymmetric. You may need to (try to) go 3D.

Please login with a confirmed email address before reporting spam

Posted: 3 days ago Dec 20, 2024, 10:40 a.m. EST

Got it. Thank you.

Got it. Thank you.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.