Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

coil winding direction

Posted Feb 13, 2013, 12:48 p.m. EST Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3a 1 Reply

Martin Kandl
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How do I determine the direction of the magnetic induction in multi turn coils.

Thank.
1 Reply Last Post Feb 13, 2013, 1:32 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 13, 2013, 1:32 p.m. EST
Hi

in 2D via the sign, in 3D via the loop sub node (right click multiturn/signle turn coil node and add corresponding sub-node "Edge reference")

it's described in the 4.3a ACDC user manual, under "Coil Domains" section probably in earleier versions too

--
Good luck
Ivar
Hi in 2D via the sign, in 3D via the loop sub node (right click multiturn/signle turn coil node and add corresponding sub-node "Edge reference") it's described in the 4.3a ACDC user manual, under "Coil Domains" section probably in earleier versions too -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content