Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

water flow in a hydrophobic tube

Posted Feb 20, 2013, 10:18 p.m. EST Fluid & Heat, Microfluidics Version 4.2 1 Reply

Azirah Salih
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I want to simulate water flow inside a tube. This tube has surface tension of 30.35mN/m which is high hydrophobicity. For now, I only able to simulate just the water flow itself. I don’t know how to create the tube hydrophobicity element. Can anyone help me with this?
1 Reply Last Post Feb 21, 2013, 1:57 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 21, 2013, 1:57 a.m. EST
Hi

check the model library, search for capillary and study that one

--
Good luck
Ivar
Hi check the model library, search for capillary and study that one -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content